Epson Gyro- and Acceleration Sensor XC1011SD combined Automotive Sensor SPI
A combined automotive sensor: one yaw-rate gyro and a dual-axis accelerometer in one package, based on Epson's Double-T quartz element.
AEC-Q100 qualified, with built-in diagnosis and strong shock and vibration resistance. Epson supports the evaluation of hardware elements under ISO 26262 up to ASIL D.
Where the XC1011SD fits best
Electronic stability control
Yaw rate and lateral acceleration in one part.
Safety platforms
Yaw and acceleration monitoring with diagnosis.
ADAS
Motion data for driver assistance functions.
Harsh environments
Quartz sensing with high shock and vibration resistance.
Key specifications
| Parameter | Typical value |
|---|---|
| Gyro axis | 1 (yaw, Z) |
| Gyro range | ±160 °/s |
| Gyro bandwidth | 52.6 Hz |
| Accelerometer axes | 2 (X, Y) |
| Accelerometer range | ±30 g |
| Accelerometer bandwidth | 52.6 / 200 Hz |
| Output | 16 bit rate and acceleration, 11 bit temperature |
| Interface | SPI |
| Supply | 3.3 V, 20 mA max. |
| Operating temperature | −40 … +105 °C |
| Qualification | AEC-Q100 |
Typical values from the Epson data sheet (PDF at Epson).
XC1011SD
Gyro + 2-axis accel.
Frequently asked questions
Why a quartz gyro?
Epson's gyros use a quartz crystal element instead of silicon. Quartz is very stable over time and temperature, which shows in low bias drift and low noise.
Do I need a full IMU instead?
If you need all three axes of rotation and acceleration, calibrated over temperature, an IMU such as the M-G366PDG saves you a lot of integration work. A single gyro fits when one axis, usually yaw, is enough or when you want a redundant axis next to an IMU.
Is it suitable for automotive series production?
Yes, it is AEC-Q100 qualified. Functional safety documentation for ISO 26262 projects is available through Epson; we coordinate this for your project.
How do I get samples?
Tell us about your project and quantities. We arrange samples, pricing and delivery times with Epson.
Talk to us about your project.We help with selection, samples and integration. Pricing and availability on request.
| Bias (°/s) bei +25°C: | +/- 3 |
|---|---|
| Country of Origin: | Japan |
| Detection Axis: | 3 |
| Interface (Protocol): | SPI |
| Operating Temperature (max): | +105°C |
| Operating Temperature (min): | -40°C |
| Range (Accelerometer): | +/- 30G |
| Rate Range (°/s): | +/-160 |
| Scale Factor (°/s) : | 175 LSB +/-5 LSB (16bit) |
| Supply Voltage : | 3.135 V - 3.465 V |