Epson Vibrationssensor M-A342VD10 UART/SPI
A compact 3-axis vibration sensor that outputs velocity and displacement directly, including RMS and peak-to-peak values.
The sensor does the signal processing, so your monitoring node or PLC gets ready-to-use values in line with ISO 10816/20816. Self-tests and threshold alarms are built in.
Where the M-A342VD10 fits best
Rotating machinery
Motors, pumps, fans and gearboxes in condition-based maintenance.
IIoT sensor nodes
Low data volume thanks to on-sensor RMS and peak values.
Structural health monitoring
Displacement output for low-frequency structural vibration.
Automation equipment
Early detection of wear and imbalance.
Key specifications
| Parameter | Typical value |
|---|---|
| Velocity | ±100 mm/s, 10 … 1000 Hz |
| Displacement | ±200 mm, 1 … 100 Hz |
| Output | raw, RMS, peak-to-peak |
| Raw output rate | 3000 Sps (velocity), 300 Sps (displacement) |
| Velocity noise density | 1.4 × 10⁻⁴ (mm/s)/√Hz |
| Interface | UART or SPI |
| Supply | 3.3 V, ≈ 29 … 32 mA |
| Operating temperature | −30 … +85 °C |
| Housing | aluminum, 25 g |
| Diagnostics | self-test, threshold alarms, resonance warning |
Typical values from the Epson data sheet. The full data sheet is available on request.
M-A342VD10
Compact
Frequently asked questions
Why velocity instead of acceleration?
Machine condition standards such as ISO 10816/20816 rate vibration severity by velocity. With direct velocity and RMS output, you skip integration and filtering in your own software.
M-A342VD10 or M-A542VR10?
Same measurement core. The M-A342VD10 is the compact 3.3 V sensor for your own electronics; the M-A542VR10 adds an IP67 housing, RS-422 and 9–32 V for direct field installation.
Is there a resonance to watch?
Yes, the internal structure resonates at about 4.5 kHz. Avoid strong excitation near this frequency and run the built-in resonance self-test after installation.
Can I test it before ordering?
Yes. For qualified projects we lend evaluation kits free of charge.
Test it in your own system.For qualified projects we lend evaluation kits free of charge. Pricing and availability on request.
| Current Consumption: | 29 mA @ 3,3V |
|---|---|
| Data rate: | 115,2k bps - 921,6k bps |
| Detected Axis: | 3 ( X/Y/Z ) |
| Frequency Range (Displacement): | 1 … 100Hz |
| Frequency Range (Velocity): | 10-1000Hz |
| Interface: | UART/SPI |
| Operating Temperature (max): | +85°C |
| Operating Temperature (min): | -30°C |
| Output Range (Displacement): | +/-200mm |
| Output Range (Velocity): | +/-100mm/s |
| Output format: | p-p (Digitaler Output), raw, rms |
| Physical Output Format: | Displacement, Velocity |
| Series/ Type: | M-A342 |
| Supply Voltage, Vcc: | 3.15 - 3.45 V |
| Weight (g): | 25 g |