Skip to main content Skip to search Skip to main navigation

Knowledge · Downloads

Epson evaluation software: loggers and viewers explained

By the AMCORIS application teamNovember 2026

IMU

QUICK ANSWER

Epson provides three Windows programs for its sensors: IMU Logger records IMU data, Vibration Data Logger records accelerometers and vibration sensors, and Vibration Data Viewer analyses those recordings with FFT, RMS and Allan variance. They are free for customers using an Epson sensor and come from us on request. For your own software there are free open-source drivers for Python, C and MATLAB.

Which software for which task?

SoftwareUse it forSensorsSystem
IMU Logger 3.11Record and view IMU data, attitude angles, CSV exportM-G330PDG, M-G366PDG, M-G370PDG/PDT, M-G355QDG, M-G570PRWindows 10/11 Pro 64-bit
Vibration Data Logger 1.2Record accelerometers and vibration sensors, several at once, scheduledM-A352AD10, M-A370AD10, M-A552AR10, M-A342VD10, M-A542VR10Windows 10/11 64-bit
Vibration Data Viewer 2.0Analyse recordings: FFT, RMS, envelope, velocity, displacement, Allan variancedata from the Vibration Data LoggerWindows 10/11 64-bit
esensorlib (Python)Own scripts and automated tests, CSV logging, register access14 IMUs, M-A352AD10, M-A370AD10, M-A342VD10Windows, Linux, Raspberry Pi
IMU LoggerPort COM3Rate 200 SpsFilter FIRCSV ✓Start ▶Gyro X/Y/Z (°/s)Accel X/Y/Z (mg)Roll / Pitch (°)
Illustration by AMCORIS, not an original screenshot
Windows · IMUs

IMU Logger 3.11

The fastest way to see what an Epson IMU does on your bench.

  • Live graphs of gyro and accelerometer outputs
  • Attitude angles (roll, pitch) on M-G330 and M-G366
  • Sampling rate, output type, moving-average and FIR filters
  • Normal and scheduled measurements, several IMUs at once
  • CSV export and communication error report
Good for: First tests after unpacking, recording static data for an Allan plot, comparing two IMUs side by side, checking a mounting position.
HardwareM-G32EV041 board (USB, power from USB) or M-G32EV031 breakout
CableUSB Type-A to Type-C, not charge-only
Version3.11, July 2024
Windows · accelerometers & vibration sensors

Vibration Data Logger 1.2

Long and scheduled recordings from one or several sensors.

  • Graphs during the measurement
  • Several sensors at the same time
  • Scheduled measurements, e.g. every night at 2 am
  • Sampling rate, output type and FIR filter settings
Good for: Structural health monitoring trials, machine vibration surveys, tilt monitoring of structures, side-by-side tests of several sensors.
HardwareM-G32EV041 board; M-G32EV051 relay board for own harness
SensorsM-A352AD10, M-A370AD10, M-A552AR10, M-A342VD10, M-A542VR10
Version1.2, August 2025
Vibration Data LoggerSensor 1 ✓Sensor 2 ✓Sensor 3 ✓Schedule 02:00Rec ●M-A342VD10 #1 · ZM-A342VD10 #2 · ZM-A342VD10 #3 · Z
Illustration by AMCORIS, not an original screenshot
Vibration Data ViewerFFTPeakAllan deviationRMS · Envelope
Illustration by AMCORIS, not an original screenshot
Windows · analysis

Vibration Data Viewer 2.0

Turns logged CSV data into answers.

  • Time and frequency domain, FFT with peak search
  • RMS, envelope analysis, digital filters
  • Velocity and displacement from acceleration, drift removal
  • Allan variance for noise and bias stability
Good for: Finding the source of a vibration, checking a sensor against its data sheet, preparing results for a report.
InputCSV files from the Vibration Data Logger
Hardwarenone, analyses files only
Version2.0, April 2026
Open source · Python, C, MATLAB

esensorlib and drivers

For your own software and automated test benches.

  • Python package esensorlib (MIT licence) on PyPI
  • Logs to console or CSV, sets rate and filters, reads registers
  • Example scripts for IMU, accelerometer and vibration sensor
  • MATLAB examples and C drivers on GitHub
Good for: Integration into your product, Raspberry Pi or Linux test setups, automated end-of-line tests.
Installpip install esensorlib
SystemWindows, Linux, Raspberry Pi
Accesspublic, no request needed
Terminal$ pip install esensorlib$ python3 -m esensorlib.example.imu_logger \ --serial_port /dev/ttyUSB0 --drate 200 --csvDetected: M-G370PDG0 · UART · 200 SpsLogging to data_20261119.csv ▇▇▇▇▇▇▇▇▇▇ 100 %count, gx, gy, gz, ax, ay, az0, 0.0012, -0.0031, 0.0007, 0.21, -0.45, 999.8
Illustration by AMCORIS, not an original screenshot

How do I get the software?

1Use an Epson sensor

The Windows programs are licensed by Epson for customers who use an Epson sensor.

2Request it

Select the programs in our download form and tell us briefly about your project.

3Receive the link

We check the request and send the download link, usually within one business day.

Without installing anything: our Allan deviation calculator reads ARW and bias instability from a CSV file directly in the browser.

SOFTWARE

Request software

Select the programs in our download form and tell us briefly about your project.

Sources: Epson product pages „How to evaluate“ for IMUs, accelerometers and vibration sensors; PyPI esensorlib 2.1.0. Status November 2026.